August 27, 2007

Self-test on Epson dot matrix products!

This topic will be helpful if you are encountering printing problem in your PC with an epson dot matrix products!

1. Power on unit (It should initialize and a steady green power will indicate)
2. Insert paper on the manual feed paper bin
3. Turn off unit, press hold LF/FF or Load/Eject button while turning on the power
It should start printing by now a combinations of text and characters.
If printer prints normally it means that it is in working condition. The problem may be caused by its printer cable or by your CPU.
Note: Make sure to printer finish printing for at least 1 page.

No comments: